Welcome to the website of Yongshun Technology Co.,Ltd.!Today is:
搜索
language
中国
韩国
韩国
韩国
韩国
韩国
News Center
Check category

Outdoor application and knowledge of WiFi antenna

(Summary description)The antenna equipment has high reliability, extremely low repair rate, and almost no protection cost; it is suitable for outdoor harsh environments and can complete non-line-of-sight transmission.

Outdoor application and knowledge of WiFi antenna

(Summary description)The antenna equipment has high reliability, extremely low repair rate, and almost no protection cost; it is suitable for outdoor harsh environments and can complete non-line-of-sight transmission.

  • Categories:Corporate News
  • Author:
  • Origin:
  • Time of issue:2019-11-04 23:18
  • Views:
Information

The guarantee of the built-in antenna performance has strict structural requirements. The basic requirements are as follows, otherwise the antenna performance will be greatly affected. The specific impact depends on the type of antenna. It is generally believed that the PIFA antenna is large in size and good in performance; the sliding cover machine must be designed with this kind of antenna.

The specific requirements are as follows: 1 The height of PIFA should be no less than 6; the nnetr of LCM should be laid out on the keyboard surface of the motherboard; 3 the width of the antenna should be no less than 0; 4 the impedance of the lead from the RF test port to the antenna feed point should be kept at 0 ohm ; The components near the PIFA antenna should be shielded as much as possible; 6 The pad of the feed point should not be less than *3; 7 The pad of the feed point should be on the top * side; 8 If the layout of the test socket is difficult, you can also put it In the antenna area; 9 Some positioning holes can be properly opened in the antenna area. 10 There should be no large metal objects such as motors, SPEAKE, ECEIVE, etc. within 7 mm of the built-in antenna

Scan the QR code to read on your phone

Follow Us:

Home         Message

About         Contact

News         ENGLISH

Product      Japanese

 

Follow us
qr Chinese
qr English
qr Japanese

Contact us

Shenzhen Xinxie Office
Contact number: 18998036969
(Yang Sheng)
Contact email: benson@szxinxie.cn
Taiwan Jie Shun Office
Contact number: 09-8166-0710
(General Manager-Yang Fengyuan)
Contact email: kent@yong-shun.com.tw

Company website: https://www.rfxinxie.com Company Address: No. 5, Alley 18, Lane 1, Renxing Road, Hukou Township, Hsinchu County

 Copyright © 2019 Xinxie Technology (Shenzhen) Co., Ltd.  粤ICP备20005589号

Username used for comment:
Messages
Description:
验证码