1. Good designability

　　The fiberglass tube 5G antenna factory found that the glass fiber tube can flexibly design various structural products to meet the requirements of use, which can make the product have a good integrity.

　　2. The glass fiber tube has good wear resistance

　　The fiberglass tube 5G antenna factory felt that the water containing a lot of mud and sand was put into the tube for a comparative test of the effect of rotating wear. After 3 million rotations, the wear depth of the inner wall of the detection tube is as follows: 0.53mm for the steel pipe coated with tar and enamel, 0.52mm for the steel pipe coated with epoxy resin and tar, and glass steel pipe for the surface hardened steel pipe is 0.21mm. Therefore, the fiberglass tube 5G antenna factory believes that the wear resistance of FRP is good.

　　3. Good electrical and thermal insulation

　　The fiberglass tube 5G antenna factory believes that FRP is a non-conductor, the electrical insulation of the pipeline is excellent, and the insulation resistance is 1012-1015Ω.cm. Only 0.23, which is five thousandths of steel, and the pipeline has excellent thermal insulation performance.

　　4. Small friction resistance and high conveying capacity

　　The fiberglass tube 5G antenna factory believes that the inner wall of the glass fiber tube is very smooth, and the roughness and frictional resistance are very small. The roughness factor is 0.0084, while the n value is 0.014 for concrete pipes and 0.013 for cast iron pipes.